Bathtubs are created in all shapes and sizes, but the straightforward types are the traditional tub (in recessed and corner models), the receptor tub, the drop-in, the traditional tub with integral and surrounds, as well as the hydromassage tub. The traditional tub with front apron comes in 4-1/2, 5, and 5-1/2-foot lengths, with frequent widths of 28 to 32 inches and typical heights from 14 to 16 inches. The apron may be the finished front or end panel that extends during the tub rim on the floor. Traditional tubs have an apron only on one side for installation inside a recess, or with an apron on a single side and an end for installation inside a corner.
Integral-surround tubs are usually molded fiberglass with wall-surround panels molded integrally on the tub to get rid of the seam where the tub meets the wall and to consume the location of waterproofing material needed for ones wall surround. Receptor tubs are roughly square and produced as being a traditional tub, only shallower. Drop-in tubs are a recent development. They have no apron and are turned down on all sides so the tub can also be recessed inside a horizontal surface. Freestanding tubs are an old-style tub with claw feet. Hydromassage tubs are made for more functions other than for taking baths.
The uncomplicated toilet can also be offered in a wide variety of choices. You can find four easy operating systems and four simple construction
Beckstrom, R. (1990). Designing & remodeling bathrooms. San Ramon, California: Ortho Books.
Lavatories come in wall-hung and pedestal lavatories as a single broad class, with countertop lavatories another. Wall-hung lavatories are made of either vitreous china or enameled cast iron, but there is also a incredibly expensive line of lavatories carved from solid blocks of marble, onyx, along with other minerals. Round, rectangular, and oval lavatories are produced in all sorts and in a wide number of sizes. Countertop lavatories come in all of the easy fixture materials, for instance molded plastic. Makers of synthetic marble and DuPont Corian supply lavatory bowls molded directly into a vanity top. Lavatories may perhaps also be custom-made, usually from a glazed-ceramic material (Harrison, p. 47).
pes. They can be either wall-hung or floor-mount models, and also the bowl shape is also either round-front or elongated. Toilets with a tank mounted directly over a back from the bowl, free in the wall, is often a close-coupled toilet, with the water connection between the a couple of parts from the shape of the cone-shaped gasket. One-piece toilets are created with tank and bowl in 1 unit. They are generally a lot more pricey because of a greater complexity in operating process. The flush-valve design is used primarily for commercial installations but can be installed during the home. They've no tanks but use direct water pressure for their flushing action (Harrison, 1984, p. 42-46).
Sunset bathrooms: Planning & remodeling. Menlo Park, California: Sunset Books.
The high-end stores carry a lesser amount of lines and also custom-made goods. Martin Lane carries only a couple of lines - Kallista and Sherle Wagner. Kallista is far more contemporary and Wagner more traditional and also the far more expensive line. Prices are high to extremely high - the Sherle Wagner line will come with jewels encrusted into the sink should you wish. The Kallista models amount from $1,000 up for a sink, $4,000 for a bathtub, and $1,500 to your toile
Thursday, October 11, 2012
Remodeling Bathrooms
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment